Roof Replacement Cost Calculator for New Jersey

Find out roughly what a new roof costs before you call anyone. Pick the roof type, enter the size of your house, and the calculator shows a price based on what Herts Roofing & Construction typically charges per roofing square in New Jersey and eastern Pennsylvania.

1. What roof do you want priced?
2. Which size do you know?

4. How steep is the roof?

This is a ballpark, not a quote. It uses our typical price per roofing square (100 square feet). Rotted plywood, extra layers of old roofing, chimneys, skylights and hard access can change the price. We measure the roof and give you a written price after a free inspection.

Our typical roof prices per square

Roofers price by the square. One square is 100 square feet of roof. These are the prices the calculator uses.

Roof typeTypical price per square
Asphalt shingles (architectural)$530 to $650
Flat roof, peel and stick (modified bitumen)$530 to $650
Flat roof, EPDM rubberAbout $1,000
Metal roofingAbout $1,000

How the calculator works out your roof size

Most people know the size of their house, not their roof. If you enter the ground-floor size, the calculator adds the extra area that comes from the slope. A normal walkable roof is about 9% bigger than the floor under it, a steep roof about 20% bigger, and a very steep roof about 36% bigger. A flat roof is the same size as the floor under it.

If you already have the roof area from an insurance report or an old quote, choose “The roof area itself” and enter that number. It will be more accurate.

What can change the price

  • Rotted plywood. We can only see the wood deck once the old roof is off. Soft or rotted sheets have to be replaced.
  • Extra layers. Two or three layers of old shingles take longer to remove and cost more to dump.
  • Roof details. Chimneys, skylights, valleys and dormers need extra flashing and labor.
  • Access. Tight lots, tall houses and landscaping close to the walls slow the job down.
  • Overhangs. The calculator measures from the walls. Wide eaves add a little roof area.

Roof cost questions

How accurate is this roof cost calculator?

It gives a ballpark, good enough to plan a budget. It cannot see your roof. For an exact number we measure the roof, check the deck and flashing, and give you a written price. The inspection is free.

How many squares is my roof?

Divide the roof area in square feet by 100. A 2,000 square foot roof is 20 squares. The calculator shows the number of squares under the price.

Why does EPDM or metal cost more than shingles?

The material costs more and the installation takes more skilled labor. Both usually last longer than asphalt shingles, which is why some owners choose them. See our metal roofing and flat roof pages for how each one is installed.

Do you offer financing?

Yes. We offer financing on larger projects. Ask about it when we give you your written price.

Get an exact price

Herts Roofing & Construction is based in Cranford, NJ and has been replacing roofs since 2015. Call 908-206-4240 or request a free estimate, and we will inspect the roof, take photos and send you a written price. You can also read how a roof replacement works from start to finish.

Find projects near you